How To Fill Ram Slots
2021年7月11日Register here: http://gg.gg/vdb80
Hi Guys,
I’ve got an Asus P5B Deluxe motherboard. Today I tried adding some new RAM to take it from 4GB to 8GB. The board is about 6 years’ old. I’ve never used the black RAM slots before, only the yellow ones (2x2GB in slots 1 and 3).
My system only sees 6GB, not 8GB. I’ve tried various combinations of the RAM, get the same result.
To check the new RAM wasn’t defective, I tried it in slot 1, a known good slot. All 4 sticks of RAM worked in slot 1, so the RAM wasn’t faulty.
All 4 sticks work in every slot except slot 2 (the first black RAM slot). If I put any stick in slot 2 - old or new - the PC is dead, it won’t even boot to the BIOS.
So it looks like I have a defective RAM slot.
Does anyone know of any way to fix this? The board is too old to RMA. I’ve tried an emery board down the defective slot, and I’ve tried squirting WD40 down it. No improvement.
Does anyone have any other ideas on how to get that bad slot working?
Thanks!
*Fill All Ram Slots
*How To Fill Ram Slots Online
*What Nightgloom and Halym said. First user manual and check how slots are described. There you should also have a quick guide on how to plug RAM. General rule: 1. Slots are A1-A2 B1-B2 2. With two same type RAM you plug A1-B1 / A2-B2 slots. The pic Nightgloom provided explains it perfectly.
*To expand on the slots filled vs performance, Dual channel RAM needs two slots filled (they are normally colour coded pairs, but the order of the slots can vary by manufacturer), So adding two sticks of RAM to the wrong slots will give you the capacity you fitted, but the RAM will only run in Single channel mode (a lower performance than Dual.
First, answer this question: How many physical slots do I have per ram channel? This will probably depend on your processor, although sometimes, a further limitation may be placed by your motherboard.
Adding additional RAM memory to computer had been always one of the easiest and efficient upgrades. Over years with baggage of hardware generations and new technologies it can get tricky.
When installing memory it’s not important what to do, but more important to do it rightFill All Ram SlotsChoose memory
There are two main factors in memory: type and speed.
By type most of it is one of DDR, DDR2 or DDR3 (unless you are looking at really old computer). Memory of different types is not compatible mechanically or electronically. Motherboards usually have slots for one specific kind of memory, some rare models can support memory of two types (but not at the same time).How To Fill Ram Slots Online
Florian duta poker. Speed of memory is faster for newer types, but also differs in margins of every type. Motherboards might only support slower speed than memory can come with. Memory of different speeds will in general work with any motherboard of required type. Slow memory will work at its speed even if motherboard can go faster. Fast memory will slow down to match motherboard if needed.
So you need memory that matches motherboard in type and (best case) speed. If adding memory it is also good idea that new modules match old ones in parameters and brand. Gambling pros and cons essay.
Manufacturers always provide (in manual and online) information on what memory motherboard supports and larger brands even offer lists of practically tested modules for each motherboard.Choose slots
I remember times when you just had to stick modules in, but those are gone.
Currently most of motherboards/processor combos support at least two memory channels. I think there are already rare (for now) configurations with three channels.
Different channels correspond to different physical slots on board. The idea is that memory must be balanced between channels and that requires them to be filled in specific order.
Motherboard manual has diagram of slot channels and numbers. For example like this one:
Letter commonly refer to channel, numbers commonly refer to order inside channel. In usual case (when manual doesn’t have other explicit instructions) slots must be filled in following order:
*First slot of first channel (A1 in example)
*First slot of second channel (B1)
*Second slot of first channel (A2)
*Second slot of second channel (B2)
*And so on.
If you need to install multiply modules it is best to add them one by one.Overall
Installing memory is not hard, but my advice is to have motherboard manual open and ready. Those slots rarely come in any kind of sane order. I had recently upgraded computer for a friend and it took me five attempts to get kit of 3x2GB memory modules working correctly.Related Posts
Register here: http://gg.gg/vdb80
https://diarynote-jp.indered.space
Hi Guys,
I’ve got an Asus P5B Deluxe motherboard. Today I tried adding some new RAM to take it from 4GB to 8GB. The board is about 6 years’ old. I’ve never used the black RAM slots before, only the yellow ones (2x2GB in slots 1 and 3).
My system only sees 6GB, not 8GB. I’ve tried various combinations of the RAM, get the same result.
To check the new RAM wasn’t defective, I tried it in slot 1, a known good slot. All 4 sticks of RAM worked in slot 1, so the RAM wasn’t faulty.
All 4 sticks work in every slot except slot 2 (the first black RAM slot). If I put any stick in slot 2 - old or new - the PC is dead, it won’t even boot to the BIOS.
So it looks like I have a defective RAM slot.
Does anyone know of any way to fix this? The board is too old to RMA. I’ve tried an emery board down the defective slot, and I’ve tried squirting WD40 down it. No improvement.
Does anyone have any other ideas on how to get that bad slot working?
Thanks!
*Fill All Ram Slots
*How To Fill Ram Slots Online
*What Nightgloom and Halym said. First user manual and check how slots are described. There you should also have a quick guide on how to plug RAM. General rule: 1. Slots are A1-A2 B1-B2 2. With two same type RAM you plug A1-B1 / A2-B2 slots. The pic Nightgloom provided explains it perfectly.
*To expand on the slots filled vs performance, Dual channel RAM needs two slots filled (they are normally colour coded pairs, but the order of the slots can vary by manufacturer), So adding two sticks of RAM to the wrong slots will give you the capacity you fitted, but the RAM will only run in Single channel mode (a lower performance than Dual.
First, answer this question: How many physical slots do I have per ram channel? This will probably depend on your processor, although sometimes, a further limitation may be placed by your motherboard.
Adding additional RAM memory to computer had been always one of the easiest and efficient upgrades. Over years with baggage of hardware generations and new technologies it can get tricky.
When installing memory it’s not important what to do, but more important to do it rightFill All Ram SlotsChoose memory
There are two main factors in memory: type and speed.
By type most of it is one of DDR, DDR2 or DDR3 (unless you are looking at really old computer). Memory of different types is not compatible mechanically or electronically. Motherboards usually have slots for one specific kind of memory, some rare models can support memory of two types (but not at the same time).How To Fill Ram Slots Online
Florian duta poker. Speed of memory is faster for newer types, but also differs in margins of every type. Motherboards might only support slower speed than memory can come with. Memory of different speeds will in general work with any motherboard of required type. Slow memory will work at its speed even if motherboard can go faster. Fast memory will slow down to match motherboard if needed.
So you need memory that matches motherboard in type and (best case) speed. If adding memory it is also good idea that new modules match old ones in parameters and brand. Gambling pros and cons essay.
Manufacturers always provide (in manual and online) information on what memory motherboard supports and larger brands even offer lists of practically tested modules for each motherboard.Choose slots
I remember times when you just had to stick modules in, but those are gone.
Currently most of motherboards/processor combos support at least two memory channels. I think there are already rare (for now) configurations with three channels.
Different channels correspond to different physical slots on board. The idea is that memory must be balanced between channels and that requires them to be filled in specific order.
Motherboard manual has diagram of slot channels and numbers. For example like this one:
Letter commonly refer to channel, numbers commonly refer to order inside channel. In usual case (when manual doesn’t have other explicit instructions) slots must be filled in following order:
*First slot of first channel (A1 in example)
*First slot of second channel (B1)
*Second slot of first channel (A2)
*Second slot of second channel (B2)
*And so on.
If you need to install multiply modules it is best to add them one by one.Overall
Installing memory is not hard, but my advice is to have motherboard manual open and ready. Those slots rarely come in any kind of sane order. I had recently upgraded computer for a friend and it took me five attempts to get kit of 3x2GB memory modules working correctly.Related Posts
Register here: http://gg.gg/vdb80
https://diarynote-jp.indered.space
コメント